For home For business Trade Investors About us Careers
Topup.je Powerhouse Accessibility
Installation advice Forms, documents & drawings
Trade Installation advice Installing heating solutions Installing electric boilers

Who is this for?

This guide is specifically for tradespeople. It covers what you need to do before and during installation. Please follow this guide to ensure we can assist you as quickly as possible.

Step 1 - House size

Complete a whole house size calculation.

Step 2 - Complete an Electricity Supply Enquiry (ESE) form

Complete the ESE form to ensure the home's electricity service and local network can accept the additional load. This important step protects you and your customer!

The ESE form is an editable PDF. You can complete it using a computer, or print it and fill it out by hand.

Electricity Supply Enquiry

157kb
Download

Step 3 - Return the completed ESE to our team

By email

ese@jec.co.uk

By post / by hand

ESE Team
Jersey Electricity
The Powerhouse
Queens Road
St Helier JE4 8NY

By hand only

Customer Service desk at the Powerhouse

Step 4 - We confirm receipt of your application

Once we've received your completed ESE form, we will send you written confirmation and begin processing your application.

Step 5 - Plan your installation

Plan your installation. If you comply with our Approved Heating Guidelines, your customer can benefit from our Economy 20 Plus discounted heating tariff.

Step 6 - Changing tariff?

If your customer is changing tariff, you will also need to submit a Connection of Meter form quoting your ESE number from your confirmation letter. You'll need to run a new supply from the meter to the boiler to take advantage of our Economy20+ tariff, with isolation at the meter and the boiler.

Please send your completed form to our Metering Team by the following methods:

By email

meter@jec.co.uk

By post / by hand

Metering Team
Jersey Electricity
The Powerhouse
Queens Road
St Helier JE4 8NY

By hand only

La Collette Power Station Reception.

Connection of Meter form

164kb
Download

Step 7 - Advise the customer on finance options

If your customer is switching from oil or gas heating, they can pay for the installation through our zero or low-interest finance offers. They can learn more about the options in our Finance for electric heating guide.

Step 8 - Installation

Carry out your installation in line with the manufacturer's specifications. If you need help, our Energy Solutions Team deal with most major manufacturers that supply the island.

Step 9 - After installation

If your customer needs help setting up their heating controls, tell them to contact our Customer Care Team. Our trained Home Energy Advisers offer free home visits to help your customers get the most from their new system.

An electrician carries out maintenance.

CosyCare Maintenance

Get peace of mind with year-round maintenance cover for your electric heating system, hot water supply and air conditioning.

Learn More

Key benefits of electric boilers

100% efficient

Low-carbon heating with excellent JSAP score

Various sizes to suit a range of discreet locations

Suitable for all properties with wet radiators or a wet underfloor heating systems

Can be retrofitted into most existing systems

No fuel tank or flue required

Quiet when running

Easy to control

Built-in controls and app connectivity allow remote access via smartphone or tablet

Your Customer Number

Your 5 character Customer Number can be found in the top right and bottom left corners of your bill.

Example electricity bill with the customer number highlighted

Daily Service Charge

The Daily Service Charge covers energy support services such as metering, billing, Customer Care, safety obligations and other energy support services.

Off-peak

Off-peak means not at the most popular time. Some of our tariffs provide discounted rates at off-peak times - for example, during certain periods at night.

Off peak charging times

Our current off peak electric vehicles times are from 00:00 to 06:59.

Dedicated supply circuit

A dedicated supply circuit is an electrical circuit that is set aside for a specific purpose, such as powering a boiler. It will work with a single appliance only.

It will have its own circuit breaker in your fuse box, and no other device or appliance will be able to draw power from it. A dedicated supply circuit ensures that appliances can draw the current they need without overloading your system, blowing a fuse or tripping an electric circuit.

Invoice Number

This can be found on the top right corner of your bill here

Example electricity bill with invoice number

Premise Number

This can be found on the top right corner and bottom left corner of your bill.

Example electricity bill with premise number highlighted

Payment Slip

This can be found at the bottom of your bill here

Bill payment slip example

Peak Load

Peak load or peak demand is a short period when the demand for electricity is at its highest.

Kilowatt Hours

Electricity consumption is usually measured in kilowatt hours, or kWh for short. Each kWh of electricity equates to 'one unit of electricity' for billing purposes. A 1kW (1,000 Watts) appliance in use for one hour = 1kWh (one unit). The cost per unit used depends on which tariff you are on.

Three phase

Residential homes are usually served by a single-phase power supply, while commercial and industrial facilities usually use a three-phase supply.

One difference between single-phase and three-phase is that a three-phase power supply better accommodates higher loads. Single-phase power supplies are most commonly used when typical loads are lighting or heating, rather than large electric motors.

Another important difference between 3-phase power and single phase power is the consistency of power delivery. Because of the variations in voltage, single-phase power supply does not offer the same consistency as a three-phase power supply. A three-phase power supply delivers power at a steady, constant rate.

kVA

A kVA is simply 1,000 volt-amps. A volt-amp, or ampere, (VA) is the voltage times the current feeding an electrical load.

Embedded generator

Embedded generators like wind turbines and solar panels are connected to your electricity supply and provide electricity for onsite use. They also have the capability to export back to the grid.

Smart Card Number

Your Smart Card Number is the 19-digit number displayed below the barcode on your Smart Card.

The Smart Card Number also contains your six-digit Meter Number that is also displayed on your meter. You need this to top up a Smart Pay As You Go Meter whether at a Payzone outlet or online.

Example of Smart card for meter charging

Smart Card

A Smart Card contains your unique Smart Card Number used when topping up a Smart Pay As You Go Meter.

Example of a smart card for meter charging

F-Credit

F-credit is a Pay As You Go meter display and means Friendly Credit. It is the period between 9pm and 8am. If the credit on your meter runs out during this period, your supply will remain on until 8am.

Decarbonise

The process of reducing carbon by replacing fossil fuels with fuel that is less harmful to the environment such as low-carbon electricity.

Regenerative braking

With conventional braking systems, the kinetic energy that was propelling the vehicle forward gets converted to unwanted and wasted heat by the friction of the brakes.

Regenerative braking recaptures much of the car's kinetic energy and converts it into electricity, so that it can be used to recharge the car's batteries.

In addition to improving the efficiency of a vehicle, regeneration can significantly extend the life of the braking system, as the mechanical parts will not wear out as quickly.

Power factor

Power factor is the ratio of useful power in kilowatts (kW) to apparent power, measured in kilovolt amperes (kVA). A perfect power factor would be 1.0, however in reality this is almost impossible to achieve. Office buildings are usually between 0.98 and 0.92. Bad power factor is anything below 0.85.

Electric flow boiler

Electric flow boilers are simple to install, quiet in operation, 100% efficient and integrate into most existing radiator or underfloor piped systems. Plus, with no flue or storage tank, an electric boiler is a space-saving option that can be installed almost anywhere in your home.

Approved heating system

A heating system, approved by Jersey Electricity, on a dedicated supply for use on one of our discounted heating tariffs.

To learn more about what's required for an approved heating system, view our current approved heating guidelines.

20-digit payment code

The 20-digit payment code is issued with your receipt for a Pay As You Go (PAYG) meter top-up. If your meter did not charge automatically, you can do it manually with the payment code. Press button A on your meter then key in your 20-digit payment confirmation code on the meter keypad, then press button B. Your meter will recognise the amount paid and charge accordingly.

Single phase

Single-phase power supplies are most commonly used when typical loads are lighting or heating, as in a domestic home, rather than large electric motors and higher loads. Single-phase power is a two-wire alternating current (AC) power circuit.