Find out more about a free, no obligation electric heating survey, please complete the form.
We’ll get in touch to arrange a suitable time to visit your home and complete the survey.
All Areas
Switch to electric to reduce your heating bill by over 60%**, and for a limited-time receive up to a £9,000+ off installation. Discover your options for a warm, energy-efficient home using our fuel switch tool.
Switch on to electric heating. See how you can save.
Find out how much it could cost to install and run your new electric heating by answering five simple questions.
Find out more about a free, no obligation electric heating survey, please complete the form.
We’ll get in touch to arrange a suitable time to visit your home and complete the survey.
The Government's low carbon heating incentive is a financial incentive to help move households and businesses away from fossil fuels.
Those with an oil or gas heating system can now apply for up to £9,000+ match funding towards a low carbon alternative.
Up to 500% efficient
Low running costs
Heating and cooling
Good for the environment
Air source are easy to install
Low emissions compared to oil & gas
An air source heat pump can cut your heating bill by over 60%.**
They provide renewable heat, are incredibly efficient, easy to install and good for the environment.
0% finance, 100% easy. We’ve got financing solutions for everyone, including a 10-year interest-free scheme.
Plus, you can now save up to £9,000+ through the Government of Jersey Low Carbon Heating Incentive Scheme. So don’t sweat it, we have a solution for you.
Slash your energy costs and carbon emissions with up to 50%* off the cost of installing electric heating. Safer, cleaner, kinder, cheaper. Choose to do something good for your home and your Island.
◊£67 per month is based on an air source heat pump installation of £16,000, discounted to £8,000 after the Government of Jersey Low Carbon Heating Incentive, with payments spread interest free over 120 months.
§£28 per month is based on an electric boiler installation of £6,700, discounted to £3,350 after the Government of Jersey Low Carbon Heating Incentive, with payments spread interest free over 120 months.
*Based on an expected seasonal coefficient of performance (average energy efficiency) of 400% for an Air Source Heat Pump compared to an 85% efficient non-condensing oil boiler.
**Based on an expected average cost per unit of useful energy of 4.0p for a 400% efficient air source heat pump, compared to 24.7p for a 90% efficient gas boiler. Prices as of January 2025.
**Based on an expected average cost per unit of useful energy of 4.0p for a 400% efficient air source heat pump, compared to 10.1p for an 85% efficient non-condensing oil boiler. Prices as of January 2025 (electricity) and December 2024 (oil).
+Save up to a maximum of £9,000 towards the cost of an air source heat pump, based on a successful application to the Government of Jersey Low Carbon Heating Incentive Scheme.
^Based on an expected average cost per unit of useful energy of 16.1p for a 100% efficient electric boiler, compared to 24.7p for a 90% efficient gas boiler. Prices as of January 2025.
‡Save up to a maximum of £4,000 towards the cost of any direct electric heating system, based on a successful application to the Government of Jersey Low Carbon Heating Incentive Scheme.
‖Based on an expected average cost per unit of useful energy of 4.0p for a 400% efficient air source heat pump, compared to 23.0p for an 90% efficient gas boiler. Prices as of January 2025.
Your 5 character Customer Number can be found in the top right and bottom left corners of your bill.
The Daily Service Charge covers energy support services such as metering, billing, Customer Care, safety obligations and other energy support services.
Off-peak means not at the most popular time. Some of our tariffs provide discounted rates at off-peak times - for example, during certain periods at night.
Our current off peak electric vehicles times are from 00:00 to 06:59.
A dedicated supply circuit is an electrical circuit that is set aside for a specific purpose, such as powering a boiler. It will work with a single appliance only.
It will have its own circuit breaker in your fuse box, and no other device or appliance will be able to draw power from it. A dedicated supply circuit ensures that appliances can draw the current they need without overloading your system, blowing a fuse or tripping an electric circuit.
This can be found on the top right corner of your bill here
This can be found on the top right corner and bottom left corner of your bill.
This can be found at the bottom of your bill here
Peak load or peak demand is a short period when the demand for electricity is at its highest.
Electricity consumption is usually measured in kilowatt hours, or kWh for short. Each kWh of electricity equates to 'one unit of electricity' for billing purposes. A 1kW (1,000 Watts) appliance in use for one hour = 1kWh (one unit). The cost per unit used depends on which tariff you are on.
Residential homes are usually served by a single-phase power supply, while commercial and industrial facilities usually use a three-phase supply.
One difference between single-phase and three-phase is that a three-phase power supply better accommodates higher loads. Single-phase power supplies are most commonly used when typical loads are lighting or heating, rather than large electric motors.
Another important difference between 3-phase power and single phase power is the consistency of power delivery. Because of the variations in voltage, single-phase power supply does not offer the same consistency as a three-phase power supply. A three-phase power supply delivers power at a steady, constant rate.
A kVA is simply 1,000 volt-amps. A volt-amp, or ampere, (VA) is the voltage times the current feeding an electrical load.
Embedded generators like wind turbines and solar panels are connected to your electricity supply and provide electricity for onsite use. They also have the capability to export back to the grid.
Your Smart Card Number is the 19-digit number displayed below the barcode on your Smart Card.
The Smart Card Number also contains your six-digit Meter Number that is also displayed on your meter. You need this to top up a Smart Pay As You Go Meter whether at a Payzone outlet or online.
A Smart Card contains your unique Smart Card Number used when topping up a Smart Pay As You Go Meter.
F-credit is a Pay As You Go meter display and means Friendly Credit. It is the period between 9pm and 8am. If the credit on your meter runs out during this period, your supply will remain on until 8am.
The process of reducing carbon by replacing fossil fuels with fuel that is less harmful to the environment such as low-carbon electricity.
With conventional braking systems, the kinetic energy that was propelling the vehicle forward gets converted to unwanted and wasted heat by the friction of the brakes.
Regenerative braking recaptures much of the car's kinetic energy and converts it into electricity, so that it can be used to recharge the car's batteries.
In addition to improving the efficiency of a vehicle, regeneration can significantly extend the life of the braking system, as the mechanical parts will not wear out as quickly.
Power factor is the ratio of useful power in kilowatts (kW) to apparent power, measured in kilovolt amperes (kVA). A perfect power factor would be 1.0, however in reality this is almost impossible to achieve. Office buildings are usually between 0.98 and 0.92. Bad power factor is anything below 0.85.
Electric flow boilers are simple to install, quiet in operation, 100% efficient and integrate into most existing radiator or underfloor piped systems. Plus, with no flue or storage tank, an electric boiler is a space-saving option that can be installed almost anywhere in your home.
A heating system, approved by Jersey Electricity, on a dedicated supply for use on one of our discounted heating tariffs.
To learn more about what's required for an approved heating system, view our current approved heating guidelines.
The 20-digit payment code is issued with your receipt for a Pay As You Go (PAYG) meter top-up. If your meter did not charge automatically, you can do it manually with the payment code. Press button A on your meter then key in your 20-digit payment confirmation code on the meter keypad, then press button B. Your meter will recognise the amount paid and charge accordingly.
Single-phase power supplies are most commonly used when typical loads are lighting or heating, as in a domestic home, rather than large electric motors and higher loads. Single-phase power is a two-wire alternating current (AC) power circuit.